一般來說，光靠加工就能修復和調整鋁卷鋁板的形狀，但是不能從根本上改變整個鋁卷鋁板的形狀。因此，原鋁卷鋁板的形狀直接影響成品鋁卷鋁板的形狀和尺寸精度，以及鋁卷鋁板的質量和產品水平板面，那么大家知道具體的影響因素是什么嗎?對此了解多少呢?是不是不清楚呢?沒關系，接下來 鋁卷生產廠家將為大家介紹一下。
Generally speaking, the shape of aluminum coil plate can be repaired and adjusted only by processing, but the shape of the whole aluminum coil plate cannot be fundamentally changed. Therefore, the shape of the original aluminum coil plate directly affects the shape and dimensional accuracy of the finished aluminum coil plate, as well as the quality of the aluminum coil plate and the horizontal surface of the product. Do you know the specific influencing factors? How much do you know? Is it not clear? It doesn't matter. Next, the aluminum coil manufacturer will introduce it to you.
(1)合金狀態對平整度的影響
(1) Effect of alloy state on flatness

一般來說，鋁合金的硬度越大，在精整過程中控制和調整鋁帶的形狀就越困難。鋁板帶材精加工人員在控制和調整鋁板帶材時，應與前一道工序控制人員和橫切精加工操作人員配合。
Generally speaking, the greater the hardness of aluminum alloy, the more difficult it is to control and adjust the shape of aluminum strip in the finishing process. When controlling and adjusting the aluminum plate and strip, the finishing personnel should cooperate with the previous process control personnel and cross cutting finishing operators.
在作出科學合理的判斷后，應選擇合適的手段矯直鋁帶鋼板的板形。如果無法生產鋁帶板，鋁帶板板形的調整和控制應從調整張力、托輥位置等處開始，并加強相關部件的調整。
After making scientific and reasonable judgment, it is necessary to choose appropriate means to straighten the shape of aluminum strip and steel plate. If it is impossible to produce aluminum strip sheet, the adjustment and control of aluminum strip sheet shape should start from adjusting tension, idler position, etc., and strengthen the adjustment of relevant parts.
 鋁卷生產廠家
Aluminum coil manufacturer
(2)機組安裝等級和質量對鋁板帶材形狀的影響
(2) Influence of installation grade and quality of unit on shape of aluminum plate and strip
鋁卷廠家表示精整設備的安裝等級將直接影響鋁帶的形狀，安裝等級由當?shù)赝顿Y政策和鋁帶精整過程的投資成本決定。列車的安裝質量應基于列車和設備中間線之間的垂直度。
Aluminum coil manufacturers said that the installation level of finishing equipment will directly affect the shape of aluminum strip, and the installation level is determined by the local investment policy and the investment cost of aluminum strip finishing process. The installation quality of the train shall be based on the perpendicularity between the middle line of the train and the equipment.
(3)矯直機輥位對鋁帶形狀的影響
(3) Influence of straightener roll position on aluminum strip shape
目前，矯直機在精整過程中矯直鋁帶板時，輥位的水平度不夠，主要是由于生產過程中調整輥位造成的。在輥更換調整過程中，上輥和下輥的水平度可能同時不夠，或者上輥和下輥之一可能不夠。上下輥的水平度不足可能會在拉直的鋁帶板上造成雙面邊緣波或單面邊緣波板面。
At present, the leveling of the roller position is not enough when straightening the aluminum strip in the finishing process, mainly due to the adjustment of the roll position in the production process. In the process of roll replacement and adjustment, the levelness of the upper roll and the lower roll may not be enough at the same time, or one of the upper roll and the lower roll may not be enough. Insufficient levelness of upper and lower rolls may cause double edge wave or single edge wave on the straightened strip.
帶材偏差也是影響鋁帶不良形狀的原因之一。因此，操作人員應經常檢查矯直機的水平度，以確保在實際精整過程中有效控制鋁板和鋁帶的形狀。
Strip deviation is also one of the reasons that affect the bad shape of aluminum strip. Therefore, operators should often check the levelness of the straightener to ensure that the shape of aluminum plate and strip is effectively controlled in the actual finishing process.
鋁卷廠家在上文中介紹了一下鋁卷鋁板板形的影響因素，相信大家看完之后會對此有新的認識和了解，如若想要了解更多的內容，可以多多關注我們的網站：http://m.zztibbs.com 希望能夠幫助到大家。
Aluminum coil manufacturers have introduced the influencing factors of aluminum coil shape above. I believe you will have a new understanding after reading it. If you want to know more, you can pay more attention to our website: http://m.zztibbs.com  Hope to help you.